OMG Roofing Products
Presents The RhinoBond Plate Marking Tool An easy to use tool that locates and temporarily marks properly installed RhinoBond plates under roofing membranes. Finding RhinoBond Plates has NEVER been easier! Using the RinoTrac Tool can help provide a quality installation. Load the RhinoBond plates Set the proper depth with the hand adjustment ring. Install the RhinoBond plates in straight rows. RhinoBond plates should be flush with the top of the insulation but not over-driven Tool assembly is fast and easy. With the tool in the case, insert the lower handle into the arms on the base of the marking tool. Secure with cotter pins provided. Next attach the upper handle and secure in place with cotter pins provided. Done! The handle moves in both directions for easy rooftop maneuverability. Place the tool so it straddles a row of installed RhinoBond Plates. Walk at a normal speed while pushing the tool in front of you. Tool leaves a temporary mark on the membrane whenever it passes over a properly installed RhinoBond Plate. In some instances, you may need a second pass over the plates. The NEW RhinoBond Plate Marking Tool Finding RhinoBond Plates has NEVER been easier!