ArticlesBlog

ASTM c1701 Pervious Concrete Infiltration Test – Concrete Brief

ASTM c1701 Pervious Concrete Infiltration Test – Concrete Brief


ASTM C1701 is the standard infiltration test
for pervious concrete. We recommend that an infiltration test be performed at least annually
in multiple locations to identify where and when maintenance might be needed. The test consists of four main components:
Installing the infiltration ring, prewetting the concrete, testing the concrete and calculating
the results. To install the infiltration ring, first clean
the surface. The infiltration ring must meet certain size requirements and be marked with
two lines on the interior to correctly perform the test. The ring is then placed on the cleaned surface
and secured in place with plumber’s putty. Once secure, prewet the concrete and infiltration
ring with 8 pounds of water maintaining the head of water between the two marks on the
interior of the ring. Begin timing as soon as the water hits the pervious concrete surface.
When water is no longer present of the surface, record the elapsed time of the prewetting.
The time elapsed determines the amount of water to be used in the actual test. In most cases, 40 pounds of water will be
required for the test. Record the weight. Within 2 minutes, add the proper amount of
water to the ring. As with the prewetting stage, we will begin timing when the water
impacts the pervious concrete surface and maintain the water head between the two lines
marked on the infiltration ring. Again, when water is no longer present of the surface,
record the elapsed time of the test. With all of our data points collected, we
then perform the infiltration calculation using the mass of the water, the diameter
of the infiltration ring and time of the test. With that information we have our final infiltration
rate. A link to purchase the ASTM C1701 from ASTM
international can be found on our web site at ChaneyEnterprsises.com/PerviousConcrete

Comments (2)

  1. No one mentioned the diameter of concrete

  2. Plz tell me the material stick to that ring

Comment here